Pressure washing is the key step in preparing your home for painting. If you don’t clean the dirt from a wall then the likelihood that any paint coating you apply will be worn out sooner than it needs to. Pressure washing removes dust, mildew, chalk, and old paint utilizing highly pressurized water. A few of these washers are electric, while others use gas as their fuel. Below are tips on how to pressure wash your house before painting.
High Pressure Rinse to Remove Debris
Before you start the deep cleaning process, you’ll need to spray off any huge, free debris and wet the whole surface. Utilize a high-pressure tip that is sufficiently solid to separate dirt and debris, however less pressure that you damage your siding. By and large, this will be your green tip or your yellow tip. Red tips (0-degree) are amazingly concentrated and ought not to be utilized for siding. Red tips can extremely damage your siding. When you locate a satisfactory pressure and separation, remember it for step three. You will use a similar measure of pressure once more. Make sure to cover all spots that you will be painting, and make an effort not to miss any areas. If you do miss a spot, you will be able to tell.
Low-Pressure use of appropriate detergents
Utilizing a low-pressure tip, for example, a 4.0 size tip or a 40-degree white tip, utilize the detergent utilizing your detergent container or a different bucket of detergent. Some pressure washers may incorporate a tip usually designed for detergents that might be marked “cleanser.” Using the cleanser tip, equitably spray the water and detergent mixture in an upward sweeping way. This will help to distribute the solution uniformly. Ensure you’re utilizing an eco-friendly detergent having a neutral pH, as it will be less harming to your siding and encompassing plants.
Remove all deep down dirt using high-pressure rinse
Since you have sprayed away the large debris, connected your detergent solution, and allowed it to extricate the remaining deep-down dirt, it’s an ideal opportunity to tidy it up and perceive how it looks. Come back to the high-pressure settings you utilized before to remove stuck-on crud without harming your siding safely. Start from where you initially connected the detergent, and work your way through a similar pattern, spraying in an upward sweeping motion. Rinse until the majority of the detergent and dirt has all the earmarks of being gone. You might need to consider spot checking for anything which may have toughed out the pressure washer’s spray. Ensure nothing remains, and you’ll be left with the cleanest, wettest house on the piece. When it’s dry, there will be nothing left of your paint, and you’re siding to shield them from adhering.
Give the house a chance to dry completely before painting
Give all sides of your home an opportunity to dry completely prior painting. This may appear glaringly evident, yet a few sidings dry faster than others. When dry, you can start painting. This process will guarantee that the paint job lasts for long. Painting without pressure washing might last 2-3 years, while painting after an intensive pressure washing might last up to 7 years.